This page last updated on 8/8/20
New items for sale added:
August 2, 2020 - 3 bayonets
August 2, 2020 - 3 bayonets
This page focuses on world (non-German) rare and unusual bayonets and other edged weapons for sale or trade that are in above average condition for the advanced collector. Go to the German bayonets for sale section on the home page for bayonets used by Germany. These items have been described to the best of my ability. In most cases, condition refers to the overall condition of the piece. All prices are in US dollars.
|
Overall Condition Codes:
G - Good (average) VG - Very Good (above average) Exc - Excellent (near unissued) Mint - Outstanding (unissued) |
Rarity Codes:
R1 - Common (easy to find) R2 - Scarce (difficult to find) R3 - Rare (very hard to find) R4 - Extremely Rare (few known) |
AFGHANISTAN
|
Afghanistan 1888 Long Model Bayonet
Very similar to the British 1888 bayonet but is 81mm (~3.5") longer overall, has a more squared off pommel and a strong relief along the center of the blade. The right ricasso is marked with the official cipher 'Afghan Army - Mazar-e-Sherif Arsenal' used during the 1920's. The Afghan State Arsenals were producing Martini-Henry rifles into the 1930's. Wood grips held by by two rivets with an Arabic serial number on the pommel. Double edged blade with no sharpening. Leather scabbard with integral frog. Rarity: R3 Condition: VG+ Price: $680 |
   |
AUSTRIA
|
New - Austrian 1891 Ersatz Bayonet
This bayonet was made from a single piece of steel with a twisted spiraled end to fit over the rifle barrel. Marked Schmidt with a gun logo on the blade and the Austrian eagle marking on the other side. Quadrangular blade with no fullers on the sides. No scabbard. Very rare. Rarity: R3 Condition: VG+ Price: $550 |
     |
|
Austrian 1917 Ersatz Bayonet
Similar to the German style ersatz but has an upside down blade and the full muzzle ring diameter is 17mm. Straight style handle with about 30% green paint remaining. Triangular inspection stamp on the end of the pommel. Unfullered upside down blade with some light sharpening. Metal scabbard with about 40% green paint remaining. Very rare. Rarity: R3+ Condition: VG+ Price: $480 |
    |
BELGIUM
|
Uruguayan 1857 Belgian Pinfire Revolving Bayonet
Made for Uruguay. A converted French 1866 bayonet that has had the blade shortened. Made by 'A scales C' (Alex Coppel). Brass handle with leaf spring on right grip with serial number 1968 on the crossguard. Leather scabbard with brass fittings. Rarity: R3 Condition: VG+ Price: $250 |
   |
|
Belgium 1867 Remington Nagant Bayonet
Marked Nagant, Liege on the blade ricasso. Wood grips held by two polished rivets with no muzzle ring. Fullered blade with a bright finish with some staining and light pitting. Metal scabbard with oblong frog stud with about 90% blued finish remaining. Rarity: R3 Condition: VG+ Price: $600 |
   |
|
Belgium 1868 Terssen Carbine Bayonet
Very similar to the French 1866 Chassepot bayonet except that this piece has a more rounded pommel and the leaf spring is secured by a screw versus a rivet. Marked with inspection marking and 1869 date on the blade ricasso with matching serial number 3764 on the crossguard and scabbard top fitting. Very nice fullered yataghan blade with some staining and no sharpening. Excellent leather scabbard with brass fittings. Rarity: R2+ Condition: VG+ Price: $400 |
   |
|
Belgium 1868 Engineers Sawback Bayonet
Made by Belgium marked with the 'GB' Belgian inspection marking (Gouvernement Belge or Government of Belgium) on the blade and dated 1875. Brass handle with patina overall with some pitting on the steel crossguard. Crossguard is marked V2237. Sawback blade with some staining and light pitting and no shapening. Leather scabbard with dark patina on the top and bottom brass fittings marked V3329 and dated 1887. Rare sawback bayonet that needs a good cleaning. Rarity: R3 Condition: VG Price: $400 |
     |
|
Belgium 1880 Engineers Sawback Bayonet
Made by Belgium marked with the 'GB' Belgian inspection marking (Gouvernement Belge or Government of Belgium) on the blade and dated 1889. Brass handle with patina on the steel crossguard and marked 'rs5946' in the mortise slot and marked 'LD' on the blade spine. Crossguard is marked V5998. Sawback blade with some staining and light pitting on the tip and ricasso with no sharpening. Leather scabbard with patina on the top and bottom brass fittings with old glue repair on the stitches. Very rare sawback bayonet. Rarity: R3 Condition: VG+ Price: $400 |
   |
|
Belgium 1889 Sword Bayonet
Made by Alex Coppel in Germany and has Belgian inspection marking on the blade and 'V' in a circle on the crossguard. Wood handle held by two spanner nuts and has been painted black on the crossguard and pommel. Very long fullered blade with staining and light pitting overall. Metal scabbard which has been painted black overall and throat is marked M.40 and is missing the throat screw. Rare bayonet. Rarity: R3 Condition: VG Price: $450 |
   |
|
Belgium 1935 BAR Bayonet
All steel hilt with press stud with stepped back muzzle ring. Black parkerized finish on the cruciform blade with circular ricasso. Typically marked with an 'PH' in a circle on the blade and serial number 4570 on the crossguard. No scabbard since the scabbard is designed as a swiveling mount for the Belgian FM Model 30 automatic rifle (BAR) which attached to the anti-aircraft vehicle and was rarely every removed. Very rare bayonet. Rarity: R4 Condition: VG+ Price: $575 |
   |
BRAZIL
|
Brazilian 1880 Bayonet
Similar to French 1866 Chassepot but has a wider yataghan blade and no markings. Brass handle with leaf spring. Fullered yataghan blade with very light sharpening. Leather scabbard with brass fittings. Rarity: R3 Condition: VG+ Price: $300 |
   |
CANADA
|
Canadian 1893 Metford Bayonet
Manufactured by Wilkinson Sword Company of London, England in 1894. Similar handle and double edged blade as the British 1888 knife bayonet but has unique off-set muzzle ring with two rivets on the grips. Wood grips held by two rivets. Crossguard marked M&D.676. Bright double edged blade. Leather scabbard with steel fittings with frog stud serial numbered 630. White leather frog with many markings on the back. Very rare bayonet with only about 1,000 made. Rarity: R3+ Condition: Exc Price: $2500 |
     |
|
Canadian Eickhorn B2K Bayonet
New Eickhorn B2K NATO bayonet in OD green with the maple leaf symbol on the blade. Black 440A stainless blade with OD Green, Zytel handle. MOLLE Compatible Nylon Sheath with OD Green Polyamide Insert. Wire Cutter and Sapphire Sharpening Plate. Brand new with plastic bag and literature. Rarity: R2 Condition: Exc Price: $325 |
     |
CHINA
|
Chinese 1924 Belgian Ersatz Bayonet - Wood Handle
Very similar to a Chinese 1924 ersatz bayonet except that instead of an ersatz metal handle, it has a diagonal grooved wood handle and no muzzle ring. Wood handle held by two large slotted screws with bright finish on handle. Fullered blade with some light sharpening. Blued metal scabbard with oval frog stud. Rarity: R2+ Condition: VG+ Price: $375 |
   |
CZECHOSLAVAKIA
|
Czech VZ-33 Bayonet
Very similar to the VZ-24 bayonet but has a shorter handle and upside down blade. Marked on the ricasso with CSZ & letter B. Marked CETN (Gendarmerie or Police troops of Yugoslavia (Cetniks)) and serial number 4767A on the end of the pommel. The spine of the handle and frog stud is marked with an 'E' lion and 35 for 1935. Found without the muzzle ring which was removed by the Germans during WWII primarily for use as a sidearm since really couldn't be mounted on a rifle with the short mortise slot and no muzzle ring. Brown rough side out leather frog with no markings. Rarity: R3 Condition: VG+ Price: $350 |
    |
DENMARK
|
Danish 1840 Hirschfanger Bayonet
Dated 1842 on the top of the blade. Solid brass handle with brass sleeve (for musket bar attachment) along handle with leaf spring release. There is no mortise slot along side for this model. No markings on the handle or blade. Long slab blade with no fullers. No scabbard. Rarity: R3 Condition: VG+ Price: $1000 |
      |
|
Danish 1848 Hirschfanger Bayonet
Solid brass handle with brass sleeve (for musket bar attachment) along handle with leaf spring release. There is a mortise slot along side for this later model. Only markings are a '4' on the crossguard and 'A12' on the back of the handle. Long slab blade with no fullers with some staining and light peppering. No scabbard. Rarity: R3 Condition: VG Price: $950 |
      |
|
German/Danish 1855/63 Hirschfänger Bayonet
No maker with crown over 'M' on the blade and crossguard with 'JH' on the end of the pommel. Brass handle with release spring with regimental markings with mortise slot marked with regimental marking 1.1.4.C.133 and serial number 251 and 'ab' on the crossguard. Central fullered blade. Leather scabbard with brass fittings. Made for the Navy 1853/66 rifle. Only 2,540 were bought by the Schleswig Holstein rebels in Liege in wars with Denmark. Rarity: R3+ Condition: VG+ Price: $1950 |
      |
EGYPT
|
Egyptian English 1907 Mk II Sword Bayonet
Wood grips held by 2 screws with oil hole in the pommel with no hooked quillion. Made after about 1914 when the hooked quillion model was no longer made. These still typically had the original British markings with additional Arabic markings added. Rarity: R2 Condition: VG+ Price: $275 |
   |
FINLAND
|
Finnish 1925 M/91rv Socket Bayonet
These bayonets were shortened M/91 bayonets that were 4.9" (125mm) less in overall length and had the tip and fullers reshaped. The modifications took place from 1925-1935 with only 3,000 being made. This is one of the most obscure bayonets made by Finland for its armed forces. It is rarely encountered today as it served a purpose only with the M/91rv rifles. When the rifle was removed from cavalry service in 1935 most of the bayonets that were issued with it were scrapped. Very few examples survives. Patina overall on the bayonet with serial number 114860 on the blade. Leather scabbard with integral belt loop with small separation near the bottom metal tip. Very rare bayonet. Rarity: R3+ Condition: VG+ Price: $525 |
    |
|
Finnish 1928 Sk Bayonet
Made by Hackman. Wood grips held by two large flush non-replaceable rivets. The handle is blued. Crossguard marked with Civil Guard acceptance ('=S='). Serial number S 94358 on the handle spine and '58' on the end of the pommel. First model scabbard with two grooves along the length with an oblong frog stud. Rarity: R2 Condition: VG+ Price: $225 |
    |
|
Finnish 1939 Bayonet
Made by O.Y. Veljekset Kulmala, A.B. and marked with the 'Sk.Y' (Suojeluskunta) for the 'White or Home Guard' on the blade ricasso. The wood handle has two small cracks near the crossguard. The short fullered blade has some staining and light sharpening. Leather scabbard with steel reinforced tip with about 85% green finish remaining. Less than 10,000 were made. Rare bayonet. Rarity: R3 Condition: VG Price: $675 |
    |
FRANCE
|
French 1866 Chassepot Bayonet - Tulle
Made by Tulle and dated 1873. Brass grips with hooked quillion with some patina. Non-matching serial numbers on the crossguard and scabbard. Yataghan blade with some staining and light sharpening. Metal scabbard with some patina overall. Rarity: R1+ Condition: VG Price: $125 |
     |
|
French 1874 Gras Navy Bayonet
Made by St. Etienne and dated 1880. Brass and wood grips with hooked quillion. Matching anchor markings and serial numbers (FG 59070) on the crossguard and scabbard. T-shaped blade with no sharpening. Metal scabbard with most of its blued finish remaining. Rarity: R2+ Condition: VG+ Price: $350 |
     |
|
French 1888/15 Lebel Bayonet
Brass grips with no quillion with removable pommel end cap. 4-sided cruciform blade. Metal scabbard with some light patina. Numbers don't match on the bayonet and scabbard. Rarity: R2 Condition: VG Price: $135 |
   |
GUATEMALA
|
Guatemalan 1958 CETME Bayonet
Made by CETME (Centro de Estudios Tecnicos de Materiales Especiales) in Spain for the model 58 assault rifle for Guatemala. Smooth wood grips held by two screws. Black phosphated bolo style blade with no sharpening. Black composite scabbard with attached canvas frog. Rarity: R2 Condition: Exc Price: $80 |
   |
HUNGARY
|
Hungarian 1935 Infantry Bayonet
Wood handle with nickeled pommel and crossguard with no muzzle sight on the pommel. Serial numbered on the crossguard. 4-sided blade which has been nickeled. Metal scabbard with Hungarian inspection mark on the frog stud which has been nickeled overall. Rarity: R2 Condition: VG+ Price: $295 |
   |
|
Hungarian 1935 Infantry NCO Bayonet
Wood handle with nickeled pommel and crossguard with no muzzle sight, hooked crossguard and laynard ring on the pommel. Serial numbered on the crossguard. 4-sided blade which has been nickeled. Metal scabbard with Hungarian inspection mark on the frog stud which has been nickeled overall. Comes with brown leather frog. Rarity: R2+ Condition: VG+ Price: $375 |
   |
|
Hungarian 1935 Calvary Bayonet
Wood handle with patina on pommel and crossguard with a muzzle sight for the Calvary. Serial numbered on the crossguard. 4-sided blade with some staining overall. Metal scabbard with Hungarian inspection mark on the frog stud with about 60% green paint remaining. Rarity: R2 Condition: VG+ Price: $375 |
   |
IRELAND
|
Irish 1874 Ulster UVF Gras Bayonet
Similar to the French 1874 Gras that has had the brass pommel filed down and the press stud catch was elongated to fit the German Gewehr 88 rifle (the modification was done by the Germans for use in Ireland). Wood handle with brass pommel and steel quillion. Top spine of blade marked St. Etienne, 1876. T-shaped blade with no sharpening. Metal scabbard with most of original finish. Non-matching numbers on the crossguard and scabbard throat. Used by the Ulster Volunteer Force and the IRA during WWI. Rare with only about 5,000 were made. Rarity: R3 Condition: VG+ Price: $400 |
    |
ISRAEL
|
British (Israeli) No. 6 MkI Bayonet
This bayonet is similar to the British trials bayonet made in 1944 that never really went into production for the British but an order was made by Israel. Wrap around wood grips held by two screws. Bright fullered blade with no sharpening. Leather scabbard with metal fittings with beige canvas frog marked GEW 43 with Canadian acceptance marking. This bayonet does not have a hole in the bottom of the crossguard or a circular mortise slot like the British No. 5 model but the No. 6 bayonet has a T-slot like the 1907 model. Rarity: R2 Condition: VG+ Price: $485 |
   |
ITALY
|
Italian 1871 Bayonet w/long leaf spring
Type Z model with the long leaf spring on the right side of the handle with a retaining nut on the end of the pommel and NO rifle stabilizing notch at the base of the muzzle ring. Bakelite style grips held by two screws. No maker marking on the blade. Serial number G9703 on the crossguard. Long fullered blade with some light staining and sharpening. Second model leather scabbard with brass fittings with unreadable maker and date on back. Rarity: R2 Condition: VG+ Price: $375 |
   |
|
Italian 1871/16 Bayonet (w/short leaf spring)
These bayonets were made by shortening the 1871 sword bayonets with the original handles and crossguards with short leaf spring and a nut on the end of the pommel. Faint maker's marking on the blade ricasso. Crossguard serial numbered CA3714. Cutdown fullered blade with much of its black finish remaining with some staining and light sharpening. Leather scabbard with brass fittings with Terni or Torino marking. A very small number of these modifications were made. Rarity: R2+ Condition: VG+ Price: $325 |
    |
|
Italian 1891/16 Ersatz Bayonet (w/long leaf spring)
These bayonets were made from the 1891 bayonets with the original handles and crossguards removed and replaced with solid brass handles and crossguards with a long leaf spring. Faint maker's marking on the blade ricasso. Brass handle with long leaf spring most of its original black finish remaining with the crossguard serial numbered WX1654. Fullered blade with much of its black finish remaining with some staining and light sharpening. Flutted metal scabbard with much of its black finish remaining with some patina overall. Rarity: R3+ Condition: VG+ Price: $600 |
   |
|
Italian 1891/16 Ersatz Bayonet (w/press stud)
These bayonets were made from the 1891 bayonets with the original handles and crossguards removed and replaced with solid brass handles and crossguards with a steel press stud. Made by 'MA' with markings on the blade, crossguard, back of muzzle ring and end of pommel. Brass handle with most of its original finish remaining. Fullered blade with much of its bright finish remaining with some staining and light sharpening. Leather scabbard with brass fittings with faint maker marking on the leather. Rarity: R3+ Condition: VG+ Price: $600 |
      |
|
Italian 1891/16 Ersatz Bayonet (w/press stud)
These bayonets were made from the 1891 bayonets with the original handles and crossguards removed and replaced with solid brass handles and crossguards with a steel press stud. No markings. Brass handle with most of the original black paint remaining. Fullered blade with most bluing remaining and some light sharpening. Metal scabbard with little black paint remaining with patina overall. Rarity: R3+ Condition: VG Price: $500 |
   |
|
Italian 1938 Folding Beretta Bayonet (2nd model)
This was the later model with the standard push button release with a male mortise slot on the top of the handle. Wood grips held by two screws. Handle has steel pommel and crossguard. Made by 'PS' in an oval (Polotti Scherma srl - Lumezzane -Brescia) with a serial number 3695 on the top spine of handle. Folding blade with press stud release. Black painted metal scabbard. Comes with black leather frog. Rarity: R3+ Condition: VG+ Price: $1150 |
   |
|
Italian 1938 Folding Beretta Brass Prototype Bayonet (1st model)
This was the first model with the latch lock button release with a male mortise slot on the top of the handle. Wood grips held by two screws. Handle has prototype steel pommel and crossguard which was made in the 1950s. No maker or serial number on the back of the handle. Folding blade with press stud release. Blued metal scabbard with about 80% finish remaining. Very rare. Rarity: R4 Condition: VG+ Price: $1360 |
   |
|
Italian 1938 Folding Beretta Brass Prototype Bayonet (2nd model)
This was the later model with the standard push button release with a male mortise slot on the top of the handle. Wood grips held by two screws. Handle has prototype brass pommel and crossguard which was made in the 1950s. No maker or serial number on the back of the handle. Folding blade with press stud release. Black painted metal scabbard. Comes with black leather frog. Very rare. Rarity: R4 Condition: VG+ Price: $1650 |
   |
|
Italian 1938 Folding Latch Lock Bayonet (1st model)
This was the earlier model with a latch lock release mechanism with a muzzle ring and latch style press release lever. Wood grips held by two screws with no blued finish remaining on the handle or blade. Serial numbered 82474 on the back of the handle. Metal scabbard with about 80% black paint remaining and is missing screw in the frog stud. Rarity: R3 Condition: VG Price: $375 |
   |
|
Italian 1938 Folding Latch Lock Bayonet (2nd model)
This was the 2nd model with a press stud release mechanism with a muzzle ring. Wood grips held by two screws with about 85% blued finish remaining on the handle and blade. Serial numbered E46164 on the back of the handle. Metal scabbard with about 25% black paint remaining with patina overall. Rarity: R2 Condition: VG Price: $255 |
   |
|
Italian 1955 BM59 Beretta Bayonet
Similar to the US M-4 bayonet. Plastic handle held by two bolts. Marked 'AET with crossed cannons symbol' (Arsenale Esercito Torino) & dated 1960 with serial number 169669 on the other side of the blade. Carbine style blade that is phosphate finished. Green fiberglass scabbard with canvas belt attachment. Rarity: R1+ Condition: Exc Price: $50 |
   |
JAPAN
|
Japanese 1856 Enfield Bayonet
Japanese made model with crude 'knight's head' logo (for W. R. Kirschbaum) on end of the pommel with serial number 154. No mum marking. Long fullered blade with some staining and no sharpening. Leather scabbard with metal fittings with patina. Black leather frog with no markings. Very rare bayonet. Rarity: R3+ Condition: VG+ Price: $800 |
    |
|
New - Japanese 1866 Chassepot Bayonet
The French 1866 bayonet is made by Kirschbaum (Knight's head) with Japanese characters on both sides of the crossguard with the date 1869. Brass handle with some patina. Yataghan fullered blade with some light sharpening. Metal scabbard with no markings. Very rare bayonet. Rarity: R3+ Condition: VG+ Price: $925 |
     |
|
Japanese 1866 Chassepot Bayonet
The French 1866 bayonet is made by P.D.L. (P. D. Luneschloss) with Japanese characters along the fuller of the blade. Brass handle with some patina with serial number 1735 on the crossguard. Yataghan fullered blade with some sharpening, cleaning and sharpening. Japanese leather scabbard with steel fittings with patina. Very rare bayonet. Rarity: R3+ Condition: VG+ Price: $875 |
   |
|
Japanese Type 30 Bayonet - Nagoya
Made by Nagoya. Slab screwed grips with about 50% bluing remaining on handle with hooked quillion with serial number on the end of the pommel on the bird's head style pommel. Fullered blade with about 60% bright finish remaining with some staining and light sharpening. Metal scabbard with about 50% blued finished remaining. Rarity: R1+ Condition: VG+ Price: $125 |
    |
|
Japanese Type 30 Bayonet - Kokura
Made by Kokura. Wrap around riveted wood grips with about 50% bluing remaining on handle with patina with hooked quillion with serial number removed on the end of the pommel on the bird's head style pommel. Fullered blade with about 60% bright finish remaining with some staining and light sharpening. Metal scabbard with about 50% blued finished remaining with patina overall. Rarity: R1+ Condition: VG Price: $95 |
    |
|
Japanese Type 30 Bayonet - Kokura Hourglass
Made by Kokura Hourglass. Slab wood grips held by rivets with about 80% bluing remaining on handle with straight quillion with serial number on handle spine (3744) of bird beak style pommel with end of pommel showing crossed out previous serial numbers. Slab blade with about 80% bluing remaining. Metal scabbard style with squared off finale. Rarity: R1+ Condition: VG+ Price: $125 |
    |
|
Japanese Type 30 Trainer Bayonet - Rocking Star
Trainer bayonet made by Rocking Star. Marked '181' on the end of the pommel and on the left grip. Wood grips held by two rivets. Bright fullered blade with sharpening. Black painted metal scabbard with several dents and heavy crease in center. Rare. Rarity: R2+ Condition: VG Price: $280 |
    |
|
Japanese Type 30 Trainer Bayonet
Trainer bayonet with no maker. Marked '30' on the end of the pommel. Wood grips held by two rivets. Bright fullered blade with sharpening. Black painted metal scabbard with several dents. Rarity: R1+ Condition: VG Price: $100 |
    |
|
Japanese Rectangular Guard Bayonet w/Rounded Muzzle Ring
Similar to the standard type 30 bayonet except that the crossguard is a thick rectangular piece of metal that is rounded off at muzzle ring end (which is a very rare modification). Made by Toyada Automatic Loom Works. Slab wood grips which are riveted with a squared off pommel which has a serial number 4358. Rectangular blued crossguard with rounded muzzle ring. Blued unfullered slab blade with no sharpening. Blued metal scabbard with a crease on the back side. Rare model variation. Rarity: R3 Condition: VG+ Price: $625 |
    |
|
Japanese Type 44 Folding Bayonet
Type I model with the attaching screws very close together. Blued finish with about 60% finish remaining. Serial numbered 946 on the bottom of the assembly. Centraled fullered blade with folding rifle attachment assembly. Rarity: R3 Condition: VG+ Price: $275 |
   |
NETHERLANDS
|
Dutch 1858 Navy Marine Bayonet
Made by German maker S&K (Schnitzler and Kirschbaum) with 1863 date on blade. Marked with Dutch crown and serial number on crossguard and re-issued date (B1912/239/1868). Brass handle with no catch mechanism but has a mortise slot that runs along the entire side of the handle (attaching mechanism contained in the firearm). Yataghan fullered blade. Leather scabbard with brass fittings which is numbered B922 and dated 1868. Only approx. 2000 bayonets were made. Rarity: R3+ Condition: VG+ Price: $1850 |
    |
|
Dutch 1895 Calvary Bayonet
No maker but was made by Hembrug. Wood grips with about 90% finish remaining on the handle. Crossguard marked 7419 N with crown over Z on the blade. T-shaped blade with about 95% blued finish remaining with no sharpening. Leather scabbard marked 'AI' just above the retaining strap. Rarity: R2+ Condition: VG++ Price: $400 |
   |
|
Dutch 1895 Artillery Bayonet
Made by Hembrug. Wood grips with about 90% finish remaining on the handle. Crossguard marked 844 F with crown over B on the blade. T-shaped blade with about 90% blued finish remaining with no sharpening. Artillery style leather scabbard with no markings. Rarity: R2+ Condition: VG++ Price: $400 |
   |
|
Dutch 1895 Artillery Bayonet
Made by Hembrug. Wood grips with about 50% finish remaining on the handle. Guard marked with serial number 2172 F with crown over E inspection marking on the blade. T-shaped blade with about 70% blued finish remaining with no sharpening. Engineer troops style leather scabbard with serial number 2854 on back with some markings on the front also. Rarity: R2+ Condition: VG+ Price: $375 |
   |
|
Dutch 1895 Artillery Bayonet
Made by Alex Coppel. Wood grips with about 50% finish remaining on the handle. Guard marked with serial number 5242 G with crown over L inspection marking on the blade. T-shaped blade with about 70% blued finish remaining with no sharpening. Engineer troops style leather scabbard with the bottom brass fitting missing. Rarity: R2+ Condition: VG+ Price: $350 |
   |
|
Dutch 1895 1st model Navy/Marines Hooked Quillion Bayonet
Made by OEWG (Oesterreichische Waffengesellschaft, Austria). These were issued to the Infantry and Navy/Marines. The infantry model has a serial number after or before 1 or 2 letters (i.e. 9774A) whereas the more scarce Navy 1st model only has a serial number on the crossguard (i.e. 1191). Wood grips with about 50% finish remaining on the handle. T-shaped blade with about 80% blued finish remaining with no sharpening. Serial numbered to the Navy/Marines 6683 and later restamped 3651B for the Infantry on the other side of crossguard. Leather scabbard with retaining strap with back marked Geb & Kloot Mewberg Oudshoorn A/O RWN & LWI 317A 9006. Rarity: R2+ Condition: VG+ Price: $425 |
   |
|
Dutch 1895 2nd model Infantry Bayonet
Made by Hembrug. Wood grips held by two polished rivets with about 70% of bluing remaining on the handle. T-shaped blade with about $70% bluing remaining. Serial number 6965 CC on the crossguard. Leather scabbard with the belt strap attachment torn off. Rarity: R2 Condition: VG Price: $125 |
   |
|
Dutch 1895 2nd model Marines Bayonet
Made by OEWG (Oesterreichische Waffengesellschaft, Austria). Wood grips with about 90% finish remaining on the hooked handle with the typical Marine metal plate and screw on the grips. Guard marked with serial number 2267 with crown over T inspection marking on the blade. T-shaped blade with about 95% blued finish remaining with no sharpening. Leather scabbard with serial number 1392 (and other crossed out numbers) on back and inspection marking 'AW' on the front side. Rarity: R3 Condition: Exc Price: $500 |
   |
|
Dutch 1895 2nd model Marines Bayonet
Made by OEWG (Oesterreichische Waffengesellschaft, Austria). Wood grips with about 75% finish remaining on the hooked handle with the typical Marine metal plate and screw on the grips. Guard marked with serial number 6597 with crown over T inspection marking on the blade. T-shaped blade with about 75% blued finish remaining with no sharpening. Very rare early model all stitched leather scabbard with no markings or retaining strap. Rarity: R3 Condition: VG+ Price: $550 |
   |
NORWAY
|
Norwegian 1860/1867 Remington Bayonet
The bayonet has a brass pommel and crossguard with wood grips held by 4 rivets with a lanyard hole through the top of the pommel with a leaf spring release. Made by the Norwegian arsenal at Kongsberg (crown over 'K') with serial number 40175 on other side of blade. Long fullered yataghan blade with no sharpening. Leather scabbard with internal brass top and bottom fittings with about 1" shrinkage. Rarity: R3 Condition: VG+ Price: $425 |
    |
PORTUGAL
|
Portuguese 1885 Kropatschek Bayonet w/Wirecutters
Marked with a Maltese cross on the blade and crossguard with serial number Q259 on the crossguard. There are no markings on the blade spine. Wood gripped handle held by two rivets. Yataghan style fullered blade. Metal scabbard with oblong frog stud. This set has a special frog which also holds a pick axe. Wood handle looks to be a replacement and leather cover over the axe blade has worn away. These sets were used by the Sapper & Miners and are quite scarce. Rarity: R2+ Condition: VG+ Price: $350 |
      |
|
Portuguese 1885 Kropatschek Bayonet w/Wirecutters
Marked with a Maltese cross on the blade and crossguard with serial number P337 on the crossguard. There are no markings on the blade spine. Wood gripped handle held by two rivets. Yataghan style fullered blade. Metal scabbard with oblong frog stud. This set has a special frog which also holds a wirecutter with the frog marked 'AE'. These sets were used by the Sapper & Miners and are quite scarce. Rarity: R2+ Condition: VG+ Price: $350 |
     |
|
Portuguese 1937 Bayonet
Made by Germany (probably by E.F. Hörster) for the Portuguese military which was a standard 98k bayonet as used by the Germans. No maker but has German waffenampts WaA519 on the pommel. Wood grips with about 90% blued finish remaining on the handle. Fullered blade with about 90% blued finish and no sharpening. Matching numbers H4715 on the guard and scabbard frog stud (H15). Metal scabbard with about 80% bluing remaining with a small ding on the top front. Exactly like the standard German 98k bayonet but with no German maker or date markings. It only has two German Waffenampts inspection markings on the pommel, one just above the flashguard, one on the press stud and one on the scabbard tip. Rarity: R2 Condition: VG+ Price: $165 |
   |
ROMANIA
|
German Modified Romanian 1893/1904 Bayonet
This is a Romanian 1893/1904 bayonet that has had the muzzle ring removed. Made by OEWG. Has Romanian 'phoenix' symbol on one side of pommel and a marking of a '2' & 'G' in between 2 flags on the other side. Serial number on the crossguard which is overstamped with J.REISS. Pitting and staining on the fullered blade. Green painted metal scabbard which is marked OEWG on the frog stud. Rarity: R3 Condition: VG Price: $225 |
    |
SERBIA
|
Serbian 1895/99 Bayonet
Markings have been removed from blade (probably was Plumb and date). Wood grips held by two spanner nuts. Double edged blade with about 90% blued finish remaining with no sharpening. Scarce Serbian metal scabbard with about 50% blued finish. Rarity: R2+ Condition: VG+ Price: $300 |
   |
|
Serbian 1895/99 Bayonet
Blade marked BT3 (Vojno Tehnicki Zavo, Yugoslavia used after 1939). Wood grips held by two spanner nuts. Double edged blade with a bright finish with no sharpening. Blued metal scabbard with oblong frog stud. Matching number 4917 on the crossguard and frog stud. Brown leather frog with retaining strap. Rarity: R2+ Condition: VG+ Price: $300 |
   |
SIAM
|
Siamese 1907 Mauser Bayonet
No markings. Wood grips held by two rivets. Double edged blade with a parkerized style finish with no sharpening. Blued metal scabbard with oval frog stud with no markings. Rarity: R2 Condition: VG+ Price: $300 |
   |
|
Siamese 1907 Mauser Bayonet
No markings. Wood grips held by two rivets. Double edged blade with staining and light sharpening. Metal scabbard with no finish remaining and a couple of heavy dents on the front side. Rarity: R2 Condition: VG Price: $225 |
   |
SPAIN
|
Spanish 1964 CETME Navy Bayonet
Marked Navy anchor on one side and a serial number over a sword in a cog wheel over TOLEDO logo on the other side. Black plastic grips with dark blued pommel and crossguard. Dark blued bolo style blade with no sharpening. Black scabbard with green canvas belt attachment. Rare model. Rarity: R2+ Condition: Exc Price: $160 |
    |
|
Spanish 1964 CETME Civic Guard Bayonet
Marked with crown FM TOLEDO on one side and SB with a sword in a cog wheel over TOLEDO on the other side. Smooth wood grips held by two rivets with bright steel pommel and crossguard. Bright fullered blade with no sharpening. Black scabbard with black leather belt attachment. Rare model. Rarity: R2 Condition: Exc Price: $225 |
    |
|
Spanish 1980s CETME L Experimental Bayonet
Made by Instituto Nacional de Industria (INI - Empresa Nacional de Santa Barbara de Industrias Militares) with serial number A995 on the blade ricasso. This is the earlier trials model of CETME L bayonet which used a rocker release on the pommel where the later CETME L bayonet used a press stud. Green plastic grips with black pommel and blade. Blade with about 95% black finish remaining. Green plastic scabbard with canvas belt attachment. Rare with less than a 1000 made for trials. Rarity: R3+ Condition: Exc Price: $300 |
    |
|
Spanish 1980s CETME L Navy Bayonet
Made by Toledo with Spanish eagle and serial number FN11807A on the blade ricasso with Navy anchor on right side of blade. Green plastic grips with black pommel and blade with Toledo sword and cogwheel logo on the blade ricasso. Blade with about 95% black finish remaining with rounded tip. Green plastic scabbard with canvas belt attachment. Rarity: R2+ Condition: Exc Price: $125 |
   |
SWITZERLAND
|
Swiss 1867 Sharpshooters Bayonet
Made by Gebr. Weyersberg, Solingen. Brass handle with leather grips serial number 154 on the pommel with '23' on the end of the pommel. The press stud is in the center of the right grip which is a very unique locking mechanism. Yataghan fullered blade with some light staining and no sharpening. No scabbard. Very rare. Rarity: R3 Condition: VG+ Price: $850 |
   |
|
Sold - German / Swiss 1871 Prototype Hirschfänger Bayonet
Made by Weyersberg. No inspection markings. Leather grips with birds head pommel with steel leaf spring with patina overall. Guard marked 1886. Fullered sawback blade with dark staining overall and light sharpening. No scabbard. Very rare German or Swiss trials or prototype bayonet with no reference found for this item. Rarity: R3+ Condition: VG Price: |
    |
|
Swiss 1878 Musician Bayonet
Similar to the 1878 model bayonet but has wood in the mortise slot, no notch to fit around the Vetterli's front sight and no press stud to be used as a sidearm by the military musicians. Made by SJG Neuhausen. Blade wood grips held by 4 rivets. Sawback blade by is only fullered on one side and is flat on the other side. Leather scabbard with metal fittings. Brown leather frog with maker markings on the back. Rarity: R2+ Condition: VG+ Price: $325 |
   |
|
Swiss 1887 Musician Bayonet
Similar to the 1887 model bayonet but has wood in the mortise slot, no notch to fit around the Vetterli's front sight and no press stud to be used as a sidearm by the military musicians. Made by SJG Neuhausen with serial number 224 on the crossguard. Blade wood grips held by 3 rivets. Sawback blade by is only fullered on one side and is flat on the other side. Leather scabbard with metal fittings. Brown leather frog with maker markings on the back. Rarity: R2+ Condition: VG+ Price: $350 |
   |
|
Swiss 1889/92 Cyclist Bayonet
These makeshift bayonets were used by bicyclist and Maxim machine gunner units due to their light weight. Typically used a 1863 or 1871 Vetterli socket bayonet for the blade and converted for use on the Schmidt-Rubin carbine rifle. Serial number 86139 on the crossguard. Blued cruciform 4-sided blade. Blued metal scabbard with leather belt loop. Rarity: R2+ Condition: Exc Price: $500 |
   |
|
Swiss Made Prototype Dutch Stoner Bayonet
Made by Waffenfabrik Bern (FW in a circle). Black plastic handle with unusual US M4 style press release and mortise slot for the Dutch Stoner 63 A1 rifle with 22mm muzzle ring. Serial numbered W 446654 on the ricasso. Double edged blade with black finish. Gray plastic scabbard. Rarity: R3 Condition: Exc Price: $375 |
   |
|
Swiss Army Post War Officer's Dagger
Made by Elsener Schwyz-Victoria (AKA Victorinox). Wood handle held by 3 rivets. Blade has a serial number 200506 on the ricasso. Double edged blade with metal scabbard with leather strap and metal clip. Comes with red and silver troddel. Rarity: R2 Condition: Exc Price: $250 |
   |
TAIWAN
|
Taiwanese M4 Bayonet
Leather washer handle with muzzle ring and knurled pommel which fit into a special adaptor on the rifle. Marked 'Taiwan' on underside of muzzle ring. Carbine blade which is very similar to the US M4 bayonet. Green plastic (not fiberglass) scabbard with green belt hanger with metal snap retention strap. I cannot find any references to verify this is an officially issued bayonet. It is has be assume that this is probably just an unusual fantasy piece. Rarity: R2 Condition: Exc Price: $85 |
   |
TRANSVAAL
|
Transvaal Sawback Bayonet
Made by Simson & Co, Suhl (Germany) but the name has been removed. Very similar to German 1871 sawback sword bayonet but the quillion is reversed. Brass handle with German style diagonal grooves with leaf spring release. Fullered sawback blade with no sharpening. Leather scabbard with brass fittings. Comes with whilte leather frog. Rarity: R3 Condition: Exc Price: $1100 |
   |
TURKEY
|
Turkish 1920s German 1898/05 (Butcher) Full Length Bayonet
This is a standard German nA (low ears model) butcher bayonet with the normal German markings and inspection stamps except has Turkish arabic numbers on the crossguard and has a full length blade. Almost always made by Waffenfabrik Mauser (who must have had a supply contract with Turkey) and dated 1917-1918. Very few full length bayonets survived with most being cut-down by the Turks (blade lengths of 10"). Made by Waffenfabrik Mauser and dated W17. Turkish serial number on the crossguard (for 7691). Wood grips with original finish on the handle. Fullered blade with some light staining, peppering and sharpening. Metal scabbard with about 40% bluing remaining. Very rare model. Rarity: R3 Condition: VG+ Price: $325 |
   |
|
Turkish G3 Bayonet
Green spiraled plastic handle with spiral grooves. Crossguard marked 6254. Black parkerized fullered blade with no sharpening. Parkerized finish metal scabbard. Rarity: R1+ Condition: Exc Price: $180 |
   |
UNITED KINGDOM
|
British Brown Bess Socket Bayonet
Marked on the blade ricasso. Socket has Z shaped mortise slot with collar cut at mortise opening. Triangular blade with fullers on two sides. Patina and rust overall. No scabbard. Rarity: R2 Condition: G+ Price: $80 |
    |
|
British 1842 Lovell Socket Bayonet
Marked with 'GB' with a crown over 31 on the blade. Marked '22' on the blade and socket. There are some markings on the bottom of the socket opening. 3-sided bayonet with fullers on the sides of the blade with a 'L' mortise slot in the socket which had an extension on the collar to accommodate the Lovell catch on the rifle. Leather scabbard with brass fittings. Rarity: R2 Condition: VG+ Price: $230 |
      |
|
British Irish Vivian Bayonet
No markings except for serial number 3237 on the handle. Brass handle with leaf spring release. Four sided cruciform blade with no sharpening. No scabbard. Researchers are unclear if this is a real bayonet or a curio bayonet but it is extremely well made. Rarity: R3 Condition: VG+ Price: $200 |
   |
|
British 1855 Lancaster Bayonet
Made by 'Bow and Arrow' trademark (Bleckmann, Solingen) and dated 9 '86. Brass pommel and crossguard with leather grips held by 3 rivets with leaf spring. Regimental marked on the pommel V.2.D.M.S.C.74. Long fullered quillback blade with some light staining and sharpening. Leather scabbard with with some dings on the bottom brass fitting. Comes with black leather frog. Rare bayonet. Rarity: R2+ Condition: VG+ Price: $650 |
     |
|
British 1859 Navy Cutlass Bayonet
No maker markings. 2nd model had leather gripped handle held by four rivets with leaf spring on right side with large hand guard with serial number '380' on the pommel. Original full knuckle bowl model. Long curved slab blade with some staining. Leather scabbard with steel fittings. Comes with white leather frog marked on back '4 RF 257'. Rare bayonet. Rarity: R2+ Condition: VG+ Price: $825 |
       |
|
British 1863 Whitworth Bayonet
Very similar to the 1856 Enfield bayonet except that it has an unusual circular mortise slot in the pommel instead of the usual 'T' slot. Only 9,000 were made from 1862 until 1866. Was produced at the R.S.A.F. (Royal Small Arms Factory) at Enfield, London and is marked E over crown over 41 on the ricasso and has inspectors marking J.B. (John Blake) and a 'K' on the top spine of the blade. Checkered leather grips held by 4 rivets with leaf spring. Long fullered yataghan blade with no sharpening. Leather scabbard with steel fittings. Comes with white leather frog. Rare bayonet. Rarity: R2+ Condition: VG+ Price: $450 |
   |
|
British 1871 Elcho Volunteer Bayonet
Made by Kirschbaum (faint) with no inspection markings which was typical for volunteer models. Leather handle held by 4 rivets and leaf spring. Fullered sawback blade with large bolo shape with no sharpening. No scabbard. Very rare bayonet. Rarity: R3+ Condition: VG+ Price: $1750 |
     |
|
British 1856/73 Martini-Henry Bayonet
Made by Kirschbaum (knight's helmet) and dated 8 '82 with British inspection stamps (crown over E over 59) on the blade. Very similar to the 1856 model bayonets but was made with the pommel marked 14 and modified by grinding it down to allow it to slide onto the top barrel band tab and the muzzle ring was bushed to 18mm for use on the Martini-Henry rifle. Inspection marked on back of handle just above the mortise slot and 'R' and 'S4' on the blade spine in front of handle. Leather grips held by 4 rivets with leaf spring held by a screw. Some had additional markings on the back spine of the handle. Yataghan style fullered blade. Leather scabbard with metal fittings. Comes with a white unmarked frog. Very scarce bayonet. Rarity: R2+ Condition: VG+ Price: $425 |
   |
|
British 1875 Sawback Bayonet
Made by Kirschbaum with no inspection markings which was typical for volunteer models. Leather handle held by 4 rivets and leaf spring. Fullered sawback blade with no sharpening. Leather scabbard with steel fittings. Very rare bayonet. Rarity: R3 Condition: VG+ Price: $725 |
    |
|
British 1879 Artillery Sawback Removed MkI Bayonet
Made by RSAF Enfield dated 1902 with inspection markings on the blade ricasso and back of mortise slot. This model was made for the Artillery and has short sawback on back of a long blade with a leather gripped handle with a hand guard. Leather grips with the leaf spring on the left side of the handle. Made between 1884 and 1886 and only 1,500 were made. Rare to find with the sawback removed on the blade. No scabbard. Very rare bayonet. Rarity: R2+ Condition: VG+ Price: $425 |
     |
|
British 1887 MkI Bayonet
Made by Enfield and dated '/88' and '98. Checkered worn leather grips held by 4 rivets with a leaf spring. Pommel is marked NEP.8028. Fullered blade with no sharpening and some staining. Leather scabbard with brass fittings which were used by the Navy. Rarity: R2 Condition: VG+ Price: $260 |
   |
|
British 1887 MkIII Bayonet
Made by Enfield and dated '/88'. Worn checkered leather grips held by 4 rivets with a press stud with 541 marked on the pommel. Non-fullered blade with no sharpening and some staining. Leather scabbard with steel fittings with throat serial numbered 9265. Rarity: R2 Condition: VG+ Price: $225 |
   |
|
British Canadian 1905 Ross MKI Bayonet
A very small quantity of Canadian Ross MkI bayonets were sold to the British during 1916. These bayonets have the British acceptance arrow on the pommel instead of the normal broad arrow in a 'C' for the Canadians. The pommel is also regimentally marked 18.M.R.B.11. Wood handles held by two screws with about 80% blued finish remaining. Bright slab blade with some light sharpening. Leather scabbard which is unmarked. Rarity: R3 Condition: VG+ Price: $425 |
    |
|
British Sten Mk II Spike Bayonet
The Sten Mk. II bayonet was fabricated out of sheet steel and utilized a rod-style blade copied from the No. 4 Mk. II socket bayonet. Although the Sten rod was of a larger diameter, this enabled the bayonet to use the existing No. 4 Mk. II scabbard. The large forward projection on the stamped spring steel catch serves as a fingerguard, so the bayonet can also be used as a hand weapon. 75,280 bayonets were believed produced during 1943–1944. Made by N.J. Edmunds (S356) (20k) and Grundy Ltd. (S41) (56k). Nearly all of the bayonets were believed scrapped, making period examples like this one quite rare today. Other markings are the British War Department "Broad Arrow" showing ownership, as well as a letter 'Z' on the side of the body (the 'Z' significance is unknown). Some found also marked with B & J Sippel Ltd (N152) who did the hardening and tempering of the bayonet. Very nice bluing overall on the bayonet scabbard. Green canvas frog with markings on the back. Points to pay attention to for original models are the raised nib of the spring catch, as well as the shape & radius of the vertical extension of this latching spring. The copies of the bayonet for the Sten MKII are almost handmade and the differences from the original stand out. When observing the tip of the spike, the original is well shaped, but the copies are not so well done & are not uniform. Please note the markings stamped on the bayonet body and the number stamped into the spike itself just forward of the body section, these marks are not present on the copies. Rarity: R2+ Condition: VG+ Price: $350 |
|
|
British (Israeli) No. 6 MkI Bayonet
This bayonet is similar to the British trials bayonet made in 1944 that never really went into production for the British but an order was made by Israel. Wrap around wood grips held by two screws. Bright fullered blade with no sharpening. Leather scabbard with metal fittings with beige canvas frog marked GEW 43 with Canadian acceptance marking. This bayonet does not have a hole in the bottom of the crossguard or a circular mortise slot like the British No. 5 model but the No. 6 bayonet has a T-slot like the 1907 model. Rarity: R2 Condition: VG+ Price: $485 |
   |
URUGUAY
|
Uruguayan 1857 Belgian Pinfire Revolving Bayonet
Made for Uruguay. A converted French 1866 bayonet that has had the blade shortened. Made by 'A scales C' (Alex Coppel). Brass handle with leaf spring on right grip with serial number 1968 on the crossguard. Leather scabbard with brass fittings. Rarity: R3 Condition: VG+ Price: $250 |
   |
|
New - Uruguayan 1895 Mauser Bayonet
No marker or markings. Wood grips held by two rivets and all original finish remaining. Fullered blade with cosmoline in excellent condition. Metal scabbard with all black finish remaining. Unissued condition. Rarity: R2 Condition: Exc Price: $110 |
  |
UNITED STATES
|
US 1835 Horstmann Socket Sword Bayonet
Marked by Horstmann & Sons on one side of the blade and Philadelphia on the other side. Brass handle with socket-type attachment on end of the pommel with straight crossguard. Long fullered single edged blade with some staining and light sharpening. Comes with rare leather scabbard with brass fittings with old glue repair on seam. Extremely rare set. Rarity: R4 Condition: VG+ Price: $2275 |
    |
|
US 1855 Harpers Ferry Bayonet
Only markings are a '7' and 'H' on the back of the handle. Brass handle with short leaf spring. Long fullered blade with slight upward tip. Leather scabbard with brass fittings. Only ~8,000 were made. Rarity: R3 Condition: VG+ Price: $450 |
     |
|
US 1855 Colt Bayonet
Made by P.D.L. (P. D. Luneschloss, Germany). Marked with serial number 1076 on the end of the pommel with a crown over 'R' over 'JA'. One piece brass handle with leaf spring. Patina on the handle and crossguard. Long fullered yataghan blade marked with crown over R with patina overall. No scabbard. Needs a good cleaning. Very rare. Rarity: R3 Condition: VG Price: $275 |
   |
|
US 1861 Navy Plymouth / Whitneyville Bayonet
Made by Collins and Co., Hartford, Conn. Brass handle with a frozen steel leaf spring. Top of the brass handle spine is serial numbered 7419 with the inspectors marking F.C.W. on the end of the pommel. Long fullered yataghan blade with some staining and patina with no sharpening. Leather scabbard with brass fittings with dent on the lower fitting and T.T.W. etched into the leather by the original owner. Only about 10,000 of these bayonets were ever made. Rarity: R3 Condition: VG Price: $450 |
   |
|
US 1862 Zouave Bayonet
No maker with inspector initials B.H. on the back of the handle and 'C' on the crossguard and blade. Brass handle with leaf spring. Fullered blade with no sharpening. Leather scabbard with brass fittings. Black leather frog with no markings. Rarity: R2 Condition: Exc Price: $375 |
    |
|
US 1866 Winchester Cadet Socket Bayonet
A shortened modified version of the 1866 Winchester socket bayonet which may have been cutdown by the Bannerman company or Movie companies for cadet or movie use. Bright socket blade and socket with blade marked with '9034'. Leather scabbard and belt loop with no markings. Rarity: R2 Condition: VG+ Price: $100 |
   |
|
US 1870 Ames Navy Bayonet
Brass handle with scale pattern grips on both sides with an anchor emblem on each side of the pommel. Marked 'Ames Mfg. Co, Chicopee, Mass.' on one side of the blade and 'U.S.N., G.G.S. with 1870. Inspector marked 'J.G.P.' on the end of the pommel and 'G.G.S' on top of handle just before the mortise slot. Centrally fullered double edged blade. Leather scabbard with brass fittings and is missing the frog stud. Only 6,000 made in 1870. Rarity: R3 Condition: VG+ Price: $450 |
   |
|
US 1873 Socket Bayonet
Socket is marked 'US'. Retaining ring on Z shaped mortise slot. About 60% bluing remaining overall. No scabbard. Rarity: R2 Condition: VG Price: $125 |
    |
|
US 1873 Trowel Bayonet
Socket is marked 'Pat Apr 16-72' with dimples etched around the handle for a secure grip. The the back half of the handle socket can rotate to lock the handle onto the rifle lug. Nice blued finish on the handle with some patina on the trowel blade. Only about 10,000 were made. No scabbard. Rarity: R2+ Condition: VG Price: $300 |
   |
|
US 1895 Lee Navy Bayonet
Marked Remington Arms (faint) on the left fuller of the blade. Wood grips held by two rivets with some staining on the handle. Fullered blade with some staining and very light sharpening. Leather scabbard with steel fittings with metal belt attachment marked with triangle shape just above the scabbard. Rarity: R2 Condition: VG+ Price: $425 |
    |
|
US 1895 Winchester Lever Action Bayonet
Made by Winchester but the name has been removed on the underside of the crossguard. This is the 16mm muzzle ring diameter model for the .30 Army Winchester Lever Action rifle. Smooth wood grips held by two rivets. Fullered blade with bright finish and light sharpening. Leather scabbard with steel fittings with metal belt attachment. Very rare bayonet. Rarity: R3 Condition: VG Price: $825 |
    |
|
US 1898 Krag Bowie Bayonet
Marked US on right side of blade and 1900 on left. Handle with some light patina. Bowie shaped blade with heavy sharpening and nick on edge near tip. Metal scabbard with light patina. Needs a good cleaning. Only 2,818 were made in the Springfield Armory. Very rare bayonet. Rarity: R3+ Condition: VG Price: $1425 |
   |
|
US Canadian 1905/10 Ross Bayonet
Marked U.S. with the ordnance bomb symbol on the wood grips and leather scabbard and many of the Canadian acceptance markings are still visible. Early 1905 bayonet with British acceptance broad arrow and dated '08 and 5 '09. Slab blade with some staining and patina. Leather scabbard with old repair on back and crack in leather on front. Rarity: R2 Condition: VG Price: $180 |
      |
|
US 1917 Knuckle Guard Fighting Knife
Made by L.F.& C. and dated 1917. Wood handle and metal knuckle guard with about 70% black finish remaining. Three side spike blade with about 80% black finish remaining and no sharpening. Green leather scabbard marked Jewell 1918 with metal fittings marked 'MS'. Rarity: R2+ Condition: VG+ Price: $575 |
     |
|
US Mark I Navy Trainer Bayonet
Black handle and blade. Blade has no nicks or cracks. USN M1 green fiberglass scabbard. Blade ricasso marked U.S.N./Mark I and the obverse is marked PB Co/NXSO-17249. Rarity: R2 Condition: Exc Price: $275 |
     |
|
US 1942 Bayonet - WT dated 1943
Made by WT and dated 1943. Black and red handle. Fullered blade with 95% phosphated finish remaining and no sharpening. USN M1 green fiberglass scabbard with 90% finish remaining. This was the rarest maker of the 1942 bayonets. Rarity: R2+ Condition: Exc Price: $975 |
     |
|
US M4 Bayonet - Utica
WWII model made by Utica unused in original box. Leather stacked handle with about 100% finish remaining. Carbine blade with about 100% parkerized finish remaining with no sharpening with greased storage paper. Early war M8A1 green fiberglass scabbard in original greased storage paper. Hard to find original WWII bayonet never used in shipping box. Rarity: R2+ Condition: Exc w/box Price: $450 |
    |
|
US Experimental T48 Type B FAL Trials Bayonet
No markings. Rare bayonet tested by the US for possible use on the Belgian FAL (Fabrique Nationale Assault) T48 7.62mm Trials rifle in the 1960's. Has metal grips held by 2 screw bolts and is parkerized overall with a grooved lever release on end of the pommel with no markings. It has a blued steel scabbard with attached US style metal belt loops. Rarity: R3+ Condition: Exc Price: $650 |
   |
|
US M5 Bayonet - Imperial
Made by Imperial. Black plastic handle with black finished blade with about 85% finish remaining. No scabbard. Rarity: R1 Condition: VG+ Price: $30 |
   |
|
US M7 Green Handled Colt Armalite Bayonet
Made by Universal Industries of West Haven, CT with a ribbed olive green plastic handle and a catch mechanism like the M4 bayonet. Molded green plastic handle held by two rivets with about 85% phosphate remaining on the blade. 2nd variation model with blade marked with the full Colt's Logo marked 'Colt's 62802 / rampant pony in circle / Armalite over Hartford, Conn. U.S.A / Patents Pending'. Green M8A1 scabbard made by B.M. & Co. with unit markings on both sides of the canvas belt attachment. Very rare bayonet. Rarity: R3 Condition: VG+ Price: $1235 |
   |
|
US M7 Green Handled Colt Armalite Bayonet
Made by Universal Industries of West Haven, CT with a ribbed olive green plastic handle and a catch mechanism like the M4 bayonet. Molded green plastic handle held by two rivets with about 90% phosphate remaining on the blade. 2nd variation model with blade marked with the full Colt's Logo marked 'Colt's 62802 / rampant pony in circle / Armalite over Hartford, Conn. U.S.A / Patents Pending'. Green M8A1 scabbard made by B.M. & Co. Very rare bayonet. Rarity: R3 Condition: VG+ Price: $1300 |
   |
|
US M7 Bayonet - Frazier
Made by FZR (Frazier Mfg.). Black plastic handle with black finished blade with about 100% finish remaining. Fiberglass green scabbard with metal tip protector marked TWB with about 100% finish remaining. FZR made bayonets from 1966-71 with about 260k made but very few are found for some reason - possibly kept in stores/inventory making them quite scarce. Rarity: R2+ Condition: Exc Price: $250 |
    |
|
US M7 Bayonet - Imperial
Made by Imperial. Black plastic handle with black finished blade with about 100% finish remaining. Fiberglass green scabbard with metal tip protector marked TWB with about 90% finish remaining. Rarity: R2 Condition: Exc Price: $60 |
   |
|
US M7 Bayonet - Imperial
Made by Imperial. Black plastic handle with black finished blade with about 95% finish remaining with blade marked P14 in black magic marker. Fiberglass green scabbard with metal tip protector marked VIZ with about 90% finish remaining. Rarity: R2 Condition: Exc Price: $55 |
   |
|
US M7 Bayonet - Imperial
Made by Imperial. Black plastic handle with black finished blade with about 95% finish remaining. Fiberglass green scabbard with metal tip protector marked PWH with about 80% finish remaining. Back of top canvas frog marked 107-72. Rarity: R2 Condition: VG++ Price: $50 |
   |
|
US M7 Bayonet - Imperial
Made by Imperial. Black plastic handle with black finished blade with about 90% finish remaining from light in/out use. Fiberglass green scabbard with no metal tip protector marked BM.Co with about 60% finish remaining. Back of top metal scabbard throat marked 15. Rarity: R2 Condition: VG+ Price: $35 |
   |
|
US M7 Bayonet - BOC
Made by BOC (Bauer Ordnance Company). Black plastic handle with black finished blade with nearly 100% finish remaining. Fiberglass green scabbard with metal tip protector marked PWH with about 80% finish remaining. Back of scabbard canvas strap unit marked. Rarity: R2 Condition: VG+ Price: $35 |
   |
|
German Export US M7 Bayonet w/rare half moon quillion
Made by Eickhorn. Only marked USM7 on bottom of crossguard with rare half moon quillion with no extension on the bottom of crossguard which was flush with handle and blade on the bottom side for mounting on top of the rifle. Black plastic grips held by two screws. Parkerized blade with some in/out marks. Comes with an unmarked green fiberglass scabbard with leather tie. Scabbard looks to have a crack on both sides of scabbard but is still secure. Rarity: R2+ Condition: Exc Price: $200 |
    |
|
US M7 Fantasy USMC Sniper Bayonet
A reproduction or fantasy bayonet possibly made by SARCO in the 1980s using an altered Navy Mark 2 knife and a Phrobis scabbard. Marked 'US Conetta' on one side of blade and 'Flaming bomb' on the other side of blade. Marked 'USMC' on the crossguard. End of pommel is marked 'S M C'. Blade has little black finish remaining with some sharpening. Phrobis scabbard with USMC insigna on the pouch with cracked sharpening stone. Very interesting bayonet. Rarity: R2 Condition: VG Price: $190 |
      |
|
US 1985 Buck Commercial Buckmaster 184 Knife - 1st year
Commercial Buck stainless steel knife with 3-line marking 'BUCK over 184 over U.S.A. which was the first year marking. Stainless steel handle with water tight screw-in pommel cap with package of supplies inside the handle tube. The compass was placed inside the pommel cap which was only done in the 1st year model. Sawback blade with no sharpening. Black plastic scabbard with canvas pouch with 2 grappling spikes wrapped in Kleenex stored in the nylon pouch. nylon tie. Comes with original box and literature in excellent unused condition. Very rare 1st model with compass in pommel cap with only 671 made. Rarity: R3 Condition: Exc Price: $845 |
       |
|
US M9 1986 Phrobis Prototype Bayonet/Scabbard
3rd generation Phrobis with 3-line Phrobis marking w/M9 over Phrobis III over U.S.A. on the left side of the blade. Fullered sawback blade with no sharpening. Sharpening stone has not been used. Extremely rare green prototype wirecutter scabbard with prototype webbing with extremely rare canvas Bianchi pancake accessory pouch. Overall has 90+% original finish. Note included in pouch from the original owner who got this from Mr. Finn in 1988. Rarity: R4 Condition: Exc Price: $1880 Buck made a very rare prototype wire cutter scabbard. A scarce variant of the MPBS M9 was designed by M. Finn for the U.S. Army bayonet trials of 1986. Phrobis won the competition with their design which, with some slight modifications, was adopted by the Army. Paralleling this development was a secondary pattern with an external wire cutter mechanism. Although this was possibly an improvement so far as the wire cutting capability, weight of the whole apparatus exceeded the maximum acceptable to the Army. It is thought that 55 of the external wire cutting scabbards were manufactured and 40 sets of the green nylon suspension with Bianchi belt clip. Rarer still is the green Bianchi "pancake" accessory pouch, of which only 15 were produced. Because these scabbards were made in numbers equivalent to the 55 standard XM9 bayonets actually shipped to the Army during the trials, there was no "specific" bayonet supplied with this scabbard. The M9 which accompanies this scabbard is an early 3rd model Phrobis "3-Line" marked example (marked 'M9 over Phrobis III over U.S.A.). The pommel/catch assembly is that used on the XM9 trials bayonets, being made from a modified M7 pommel cap. Another unusual feature is the bayonet itself has never had the factory edge applied to the blade, indicating the bayonet was likely selected from those for test or evaluation purposes. The former owner of this example acquired it directly from Mr. Finn in 1988. |
     |
|
US 1994 Buck Commercial Bayonet
Buck commercial bayonet marked '\' for 1994. Marked ' 'Buck over 188 over U.S.A.' on the left side of the blade and no markings on the other side. Green handle with about 90% finish remaining. Fullered sawback blade with some in/out wear and light sharpening. Green 4 slot scabbard with with slightly used sharpening stone and Fastex dated 1991. Rarity: R2 Condition: VG+ Price: $310 |
     |
|
New - US 1991 Buck 188+ USMC Bayonet
Marked M9-USMC, Buck 188+, USA for the USMC in 1991 with sand blasted blade. Green handle with 90% black finish remaining. Fullered wirecutter blade with about 90% gray finish remaining with in/out wear and very light sharpening. Green four strap model scabbard with fastex marked 10 '92 and with no sharpening stone and correct cutting plate with blade stop. Only 5000 were made. Rarity: R2 Condition: VG+ Price: $500 |
     |
|
US 1991 Buck 188+ Commercial Bayonet
Marked Buck 188+ for 1991 with black blade. Green handle with 90% black finish remaining. Fullered wirecutter blade with about 90% black finish remaining and light sharpening. Green two strap commercial model scabbard with fastex marked 5 '95. The black model Buck 188+ is the rarest of all the commercial bayonets with only 339 made in 1991. Very rare. Rarity: R2 Condition: VG+ Price: $350 |
       |
|
US 1991 Phrobis MFK Knife
Phrobis made MFK (Modular All-Purpose Field Knife) with etched 'Pat. Pend. USA' on the ricasso and etched Phrobis dolphin on the blade. 1st model style with false edge on both sides of the blade. Black plastic removable handle with screw on/off pommel cap. Excellent fullered sawback blade with no sharpening. Black plastic scabbard with revolving belt loop attachment with sticker marked 'Made in the USA over Patent Pending'. Rarity: R2 Condition: VG+ Price: $350 |
   |
|
US 2001 M9 Phrobis Japanese Made CUK Commercial Bayonet
Japanese made Phrobis cuk (combat utility knife) commercial bayonet etched with a 4-line Phrobis on the left side of the blade with 'M9 over PHROBIS over BAYONET' on the left side of blade and 'AK010099' on the other side. Green handle and shorter sawback blade (only 5 7/8" long versus 7 1/8" of the standard US Phrobis model) with wirecutter. Unused sharpening stone with no sharpening on the blade. Green plastic scabbard with canvas pouch. Comes with a specially made green painted wooden box marked M9 Phrobis Bayonet. Overall has about 90+% original finish and is extremely well made. Only a few hundred were made. Rarity: R3 Condition: Exc, unissued Price: $400 |
      |
|
US M9 LanCay Bayonet
Second model LanCay bayonet (Product Improved Model) which was marked with a large 'L & C' with no hyphen and made with no fuller and with hump on the blade spine. Green handle with dull gray blade with no sharpening. Two tie down style scabbard with unused sharpening stone. Fastex is dated 1995. Rarity: R2+ Condition: Exc, unissued Price: $135 |
   |
|
US M9 LanCay Bayonet
First contract model LanCay bayonet (Product Improved Model) which was marked with a large 'L & C' with no hyphen and made with no fuller and with a hump on the blade spine. Green handle with dull gray blade and no sharpening with old cosmoline still on blade. Two tie down style scabbard with no sharpening stone and Fastex clip is marked 3 '95. Rarity: R2+ Condition: Exc Price: $130 |
   |
|
US M9 LanCay Bayonet
Second model LanCay bayonet (Product Improved Model) which was marked with a large 'L & C' with no hyphen and made with no fuller and with hump on the blade spine. Green handle with dull gray blade with no sharpening. Scabbard with unused sharpening stone. Little wear overall and Fastex is dated 1995. Rarity: R2+ Condition: VG+ Price: $125 |
   |
|
US M9 LanCay Bayonet
First contract model LanCay bayonet (Product Improved Model) which was marked with a large 'L & C' with no hyphen and made with no fuller and with a hump on the blade spine. Green handle with dull gray blade and no sharpening. Two tie down style scabbard that came with sharpening stone and Fastex clip is marked 7 '00. Rarity: R2+ Condition: Exc Price: $120 |
   |
|
US M9 LanCay Bayonet
Toward the end of the 1st contract in 1994, Lancay produced an M9 that exhibited major changes to the blade design that is obvious upon inspection. The "step" on the back of the blade between the sawteeth and the guard was eliminated. Also the sawteeth were shortened. Additionally, even though this knife obviously has a second contract, P.I. (product improved) blade type, the blade color remained the same dull grey finish of the first contract. It also exhibits first contract labeling of the manufacturer (LanCay) instead of the 2nd contract type labeling (LAN-CAY) for a product improved blade. The scabbard was the later 2 slot version without a sharpening stone with an angled screwdriver tip with the Fastex dated 1995. There were only 1064 total M9's produced in this configuration to fulfill the 1st contract which makes this variation quite rare. Rarity: R2+ Condition: VG+ Price: $325 |
    |
|
US M9 Lan-Cay Utility Bayonet
Lan-Cay Utility bayonet which was marked with 'M9 over Utility' on the left ricasso and 'U S' on the right ricasso. Brownish green handle with dull gray blade and no sharpening. Two tie down style scabbard that came with sharpening stone is marked 'U S' near the wirecutter and Fastex clip is marked 11 '95. Only 900 were made. Rarity: R2+ Condition: Exc, unissued Price: $250 |
    |
|
US M9 Ontario Bayonet
Ontario all black bayonet which was marked 'M9 over Ontario over Knife Co., over USA'. Black handle with excellent black oxide coated blade with no fullers with only some light in/out use. Scabbard with no sharpening stone with Bianchi fastening clip dated 8 '00. Scarce all black model. Rarity: R2 Condition: Exc, Unissued Price: $125 |
    |
|
US Camillus CAM1A1 Wire Cutter Bayonet
Made by Camillus - Becker Knife & Tool in 2004. This is the black & green set designed without wirecutters (scabbard not made with release tab to lock wirecutters in place). Hard use carbon steel blade with black epoxy coating which was partially serrated, spear shape to penetrate body armor. All canvas belt attachment w/2 straps around exposed scabbard and 2 straps holding bayonet. Unissued mint condition. Set has not been removed from brand new in plastic bag (photos of bayonet outside of bag are for example only). Designed for the XM8 lightweight assault rifle system that was under development by the US Army from the late 1990s to the early 2000s. It was anticipated that the XM8 would become the Army's new standard infantry rifle but the project was put on hold in mid 2005 and was formally cancelled in October, 2005. The black and green set is much rarer to find than the standard tan and green standard set. Rarity: R3 Condition: Mint, unissued in original bag Price: $275 |
   |
|
German Eickhorn 2000 Commercial Bayonet
Commercial black model version of the Eickhorn (squirrel logo over made in Germany) made bayonet made for the USMC (with no USMC symbol) but the contract was later cancelled. Marked on the handle 'Bayonet 2000, Pat. Pend'. No wirecutter. Black scabbard with black canvas molle frog. Rarity: R2 Condition: Exc Price: $200 |
      |